How do I program my digital access code?

This is not a numeric keypad, you cannot program digits. Your access code can be a single press of one or more buttons at the same time. Your access code can be a minimum of 3 entries or a maximum of six entries.

Step 1: Open the unit by using the provided backup keys or factory default code, which is a single sequential press of each button starting from left to right.

Step 2: Press and hold the Learn button located on the front interior panel of the unit. A beep will sound and the indicator light will turn green and remain illuminated. This will indicate that the enrollment procedure has been initiated.

Step 3: The indicator light will remain activated as you enter the new access code. The code can be a minimum of three entries or a maximum of six entries.

Step 4: Press and hold the Learn button a second time until you hear a beep and the indicator light turns red and remains illuminated. Then re-enter new access code.

Step 5: Press and hold the Learn button one last time until the indicator light flashes green and beeps six times. This confirms that the new code has been accepted. If the indicator light illuminates in red and beeps six times, an error has occurred and you will need to repeat steps 3-7.

If you find yourself needing additional help please review our user manuals.

Leave a Comment