How do I program my GunVault?

You can reprogram a Standard or Deluxe unit as long as you can open the unit. The combination must be 3-6 entries and an entry can be a single or multiple button press.

Step 1: Open the unit. If you have not already installed a battery, do so now. 

Step 2: Find the learn button located inside the unit.

Step 3: Press and hold the learn button for approximately 2 seconds. The unit will beep once and the light will flash red once and then illuminate green. Press in your chosen combination (make sure it meets the criteria mentioned above).

Step 4: Press and hold the learn button again for approximately 2 seconds. The unit will beep once and the light will remain red. Re-enter the same combination.

Step 5: Press and hold the learn button one last time for another 2 seconds OR until you see the unit flash green 5 times and beep 5 times.

For detailed information on your specific unit please review our owner’s manuals.

Leave a Comment